Showing posts with label ball and claw. Show all posts
Showing posts with label ball and claw. Show all posts

Saturday, November 8, 2008

Miniature Wing Chair with Finish Applied






I am very lucky that my wife does all of my finishing work allowing me to concentrate on building. She has learned her end of the craft from industry experts and is really meticulous. The finish is built up layers of shellac and glaze to give a antiqued look, all done by hand.

Wing Chair Documentary (wings mortise, arm roll angle)







I have completed the mortise and tenon joint attaching the wing stile to the side chair rail as well as the top of the arm roll. The arm roll is at a 4 degree compound angle which will flair the arm rolls slightly forward and out. You know the design is working when the chair looks like it is about to walk away Loony Toons style.

Thursday, October 23, 2008

Wing Chair Documentary (seat frame together)


The seat frame is roughed out and dry fit. The trapezoid seat means that there is some angle joinery(mortise and tenon). The rear legs will be stylized with a lambs tongue into a chamfer before the seat frame is assembled. The secondary wood is soft maple which was cut down in the mid 80's by a local farmer. It actually makes unique primary wood in that it has worm holes and spalting. Ive been watching the Phitin Phills try to drive in runs to no avail. Time for a beer.

Saturday, October 18, 2008

Wing Chair Documentary (rear leg jigs and knee blocks)


I just finished making the jig to cut the top angle of the rear leg. I got the idea of these jigs from a Chippendale sofa article in Fine Woodworking magazine.





As you can see, I glued and shaped the knee blocks that extend the leg letting it flow into what will be the seat area.




I spent a couple hours late last night making this jig. I rough cut the rear mahogany leg and the jig allows both rear legs to match each other. A second jig will have to be made to cut the top part of the rear leg so the angle of the seat back matches near perfectly. The things they don't show on New Yankee Workshop is how long it takes to make all the jigs Norm Abram uses. Once you make the jigs and patterns for chair making you can produce the next one much more rapidly.

Thursday, October 16, 2008

Wing Chair Documentary (shaping ball and claw)





The cabriole leg is shaped mostly with a Nicholson 49 file. I periodically give the leg shape as I complete the ball and claw to visualise the complete leg.








The ball is shaped almost completely with a 1/2" bench chisel.









My hands really react with mahogany(turning black). If this happens to you, soap and water won't work well; use lemon juice.








The talon is completed.








The ball and claw is complete.








Sunday, October 12, 2008

Wing Chair Documentary (Beginnings)

I started a new project this week and I thought that I would document my progress over the next month or two. This is an adult size wing chair. As far a the design goes, it is somewhere between a Philadelphia and a Newport style.









It all starts with a good full size plan. Any tricky joinery can be worked out and most of the patterns can be made right from the full size plan.



Above on the right I have a solid billet of Honduras Mahogany(the real stuff) with the leg pattern marked out. I am drilling out the mortise while the leg is still square. My furniture has mortise and tenon joints whenever possible. Dowels are much easier but not as strong.





Here's the leg cut on the band saw. A lot of work still left to do.







Here is the foot marked with a various reference points such as claw width, ball height, etc. I am sawing the claws to make it easy to remove waste. If you are interested in learning how to make a ball and claw foot, I would suggest buying a guide from Olde Mill cabinet shoppe at http://www.oldemill.com/. I have no affiliation with them, but they have a great book on how to make a ball and claw foot.



Starting to shape the ball.









Top and bottom of ball complete.