Thursday, October 30, 2008

Wing Chair Documentary (back frame)




I've been working on the back frame which is probably the easiest part of the project in that there is no tricky joinery until the wing frame is added. Everything is dry fit so that I can work forward to making and attaching the wings(which will be really tricky).


















The back frame is attached with a simple scarf joint. ( the clamps are holding the back in place temporarily)










Tuesday, October 28, 2008

Old woodworking equipment


This is a really old lathe that I got from a friend and a great older woodworker named Don. It is a Goodell Pratt from the 1920-30's. I have it set up to a motor with a flat belt drive. It is relatively small with 18" between centers and runs incredibly smooth. I hope I work as well when I'm as old. I will post more on some of my old equipment later.

Saturday, October 25, 2008

Wing Chair Documentary (rear leg chamfer)




Here I am working on adding detail to the rear legs. I create reference marks to use as a guide to hand work the chamfer that you see on the right. It would Probably be easier to use a chamfer bit in a router with a stop, but I find it almost as fast and much more fun using a spokeshave.

Thursday, October 23, 2008

Shoals pale ale review

The first time I tried Shoals pale ale from Smuttynose Brewery was at a Beer festival in the late 90's. I remember enjoying it so I decided to give it another try. The case box was freshness dated which is a complete bonus. As much as I love to support the micro brewing industry, my biggest complaint is buying stale beer.

Deep amber color obviously coarse filtered with yeast and chill haze. Great head retention and foam laces glass top to bottom. Nice malty front with an orange hop presence. Serious hoppiness. More of a kettle hop than a dry hop. Bitterness is part hops part yeasty bite balanced with malty sweetness. Enjoyable. www.smuttynose.com

Wing Chair Documentary (seat frame together)


The seat frame is roughed out and dry fit. The trapezoid seat means that there is some angle joinery(mortise and tenon). The rear legs will be stylized with a lambs tongue into a chamfer before the seat frame is assembled. The secondary wood is soft maple which was cut down in the mid 80's by a local farmer. It actually makes unique primary wood in that it has worm holes and spalting. Ive been watching the Phitin Phills try to drive in runs to no avail. Time for a beer.

Saturday, October 18, 2008

Wing Chair Documentary (rear leg jigs and knee blocks)


I just finished making the jig to cut the top angle of the rear leg. I got the idea of these jigs from a Chippendale sofa article in Fine Woodworking magazine.





As you can see, I glued and shaped the knee blocks that extend the leg letting it flow into what will be the seat area.




I spent a couple hours late last night making this jig. I rough cut the rear mahogany leg and the jig allows both rear legs to match each other. A second jig will have to be made to cut the top part of the rear leg so the angle of the seat back matches near perfectly. The things they don't show on New Yankee Workshop is how long it takes to make all the jigs Norm Abram uses. Once you make the jigs and patterns for chair making you can produce the next one much more rapidly.

Thursday, October 16, 2008

Wing Chair Documentary (shaping ball and claw)





The cabriole leg is shaped mostly with a Nicholson 49 file. I periodically give the leg shape as I complete the ball and claw to visualise the complete leg.








The ball is shaped almost completely with a 1/2" bench chisel.









My hands really react with mahogany(turning black). If this happens to you, soap and water won't work well; use lemon juice.








The talon is completed.








The ball and claw is complete.